český Deutsch English Español Francais Italiano Português slovenský
Aluminium machining, aluminium sawing, micro-lubrication, aluminium cutting oil, aluminium boring oil, aluminium tapping oil, evanescent forming additive, evaporable lubricant additives, cutting oil manufacturers, cutting oil suppliers
Last update: 2024/02/12 15:40

OIL FOR MICRO-LUBRICATION AND LUBRICATION

FOR ALL DEFORMATION

OR CUTTING REMOVAL OPERATIONS

ON ALUMINIUM ALLOYS, INCLUDING WITH SILICON

GUARANTEED CHLORINE-FREE AND SULPHUR-FREE 

EXTREME PRESSURE, ANTI-WEAR, NON STAINING

ADDITIVE FOR FORMULATORS OR USERS OF EVANESCENTS LUBRICANTS

 

 

 

FIELDS AND MODES OF APPLICATION

 

MACHINING

 DEFORMATION

Cross cutting

Sawing (ribbon or circular saws)

Drilling

Threading

Turning

Milling

Stamping

Roll bending

Stamping

Plunging

Profiling

Thread forming

Spinning

Cutting

Punching

 

 

Use undiluted by classic spraying, sprinkling, in tubs with squeeze rollers, with a cloth, with felt, with low-pressure sprayers, or micro-lubrication.

ADDITIVATION:

From 10% to 20% in traditional cutting oils.

From 2% to 15% in dearomatised hydrocarbon solvents, for the creation of evanescent lubricant fluids. MICROCHEM 35 is guaranteed VOC-free.

 

ALUMINIUM ALLOYS

Series 1000 to 8000

Series 100.0 to 900.0

COPPER ALLOYS

MAGNESIUM ALLOYS

 

                             Download the data sheet

 

PHYSICO-CHEMICAL PROPERTIES TYPICALS

PHYSICAL PROPERTIES OF THE LUBRICATING OIL

PROPERTIE

STANDARD or METHOD

VALUE

UNITS

Appearance

visual

Fluid 

nm

Colour

Visual

Amber

nm

Scent

Olfactory

Without 

nm

Density at 20°C

NF EN ISO 12.185

850 

g/l

Nature of solid lubricants

-

Without 

-

Nature of base oil

-

Polymer

-

Kinematic Viscosity

Base oil at 40°C

Base oil at 100°C

NF EN ISO 3,104

 

30

28

 

mm2/s-1

mm2/s-1

Sulphated ash

NF T 60.144

0

%

Acid index (ai)

EN 14,104

< 0.1 

mg(KOH)/g

Closed-cup flash point

NF EN 22.719

> 250 

°C

Self-combustion point

ASTM E 659

> 300 

°C

Freezing point

ISO 3016

-28 

°C

Impurities

> 25 µ

> 75 µ

> 125 µ

FTMS 791 3005

 

0

0

 0 

 

number/ml

number/ml

number/ml

PERFORMANCE PROPERTIE

PROPERTIE

STANDARD or METHOD

VALUE

UNITS

Copper blade corrosion 24h 100°C

ISO 2160

1a 

value

Loss by evaporation 22h at 121°C

ASTM D 972

0.1

% mass

SHELL 4-ball test

Impression diameter

Weld load index

 

 ISO 20.623 – ASTM D 2266

 

0.56

3,500 

 

mm

daN

SRV test 

ASTM D 5707

0.18 

coefficient

Elastomer swelling test   

(dimensional change)

FTM 791

0.5 

%

Water wash-off resistance at 80°C   

ASTM 1264

0.2 

%

Cold starting torque at -20°C

ASTM D 1478-63

10

N.cm

nm: not measured or cannot be measured

 

PRESENTATIONS

     Drum 200 L

 

Fluid for machining of aluminium alloys, micro-lubrication, extreme pressure, guaranteed chlorine-free and sulphur-free anti-wear non-staining, aluminium machining, aluminium sawing, micro-lubrication, aluminium cutting oil, aluminium boring oil, aluminium tapping oil, forming evanescent additive, evaporable lubricant additive, cutting oil manufacturers, cutting oil suppliers. Manufacturers of machining fluids. Suppliers of machining fluids. Manufacturers of industrial lubricants, suppliers of industrial lubricants, suppliers of cutting fluids. Aluminium cutting fluid. Lubricant for micro-lubrication.               

 

 

 Can 20 L

 

Fluid for machining of aluminium alloys, micro-lubrication, extreme pressure, guaranteed chlorine-free and sulphur-free anti-wear non-staining, aluminium machining, aluminium sawing, micro-lubrication, aluminium cutting oil, aluminium boring oil, aluminium tapping oil, forming evanescent additive, evaporable lubricant additive, cutting oil manufacturers, cutting oil suppliers. Manufacturers of machining fluids. Suppliers of machining fluids. Manufacturers of industrial lubricants, suppliers of industrial lubricants, suppliers of cutting fluids. Aluminium cutting fluid. Lubricant for micro-lubrication.

  

Looking for another product?

Discover our entire range by clicking on the photo

 

Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area

 

 If you wish for :

 

a free sample
a technical advice
a product data sheet
a safety data sheet

 

- Please contact us -

 

IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.


IBiotec® Tec Industries®Service is on : YOUTUBE